Description
– 2 x DCS 130Ah LFP batteries
– Victron Smart Battery Protect SBP-65A
– Max alternator output 210A
– Backed by a 3 year under bonnet warranty
– Fully programmable via bluetooth
– Tiny power consumption 1.2mA when engaged
– Designed for the Land Cruiser 200 series
– Without integrated solar regulator
– Supplied with laser cut stainless steel battery brackets & hook bolts designed for the LC200’s
FREE delivery to all major cities in Australia.
------------------------------------------------------------------------------
All DCS dual battery systems (DBS) are supplied with the fully programmed Victron Smart Battery Protect’s which are a load disconnect. This device is what governs the reserve for engine starting. Very efficient only drawing 1.2mA when engaged. We recommend to use the top 80% for deep cycling for accessories and the remaining 20% is reserved for engine cranking. The SBP’s should be installed inside the cabin and you should be protecting as many of your light loads as possible, USB sockets, fridges, lighting, dash cams, UHFs, Cel-Fi’s etc.. Inverters over 300W must be wired directly to the batteries bypassing the SBP’s.
With two of the DCS 130Ah Hybrid batteries connected in parallel you can charge up to a maximum of 125A x 2, so 210A. So ideally keep alternators under 210A. All DCS batteries feature high performance cylindrical cells, and this mechanical design is very efficient so it’s very easy to recharge these batteries, there is no need to install larger alternators, OEM alternators are the best for our batteries and will charge them back up very fast. If your running a vehicle with a lazy smart alternator focus on installing a quality commercial solar panel something at least 360W. Which will easily keep the batteries topped up when running a standard sized fridge.
This system is suitable for just about every make/model of 4WD on the market that can accommodate these sized batteries under the bonnet or of course in the cabin if one so wishes.
Specifications: | – |
---|---|
Nominal Voltage | 12.8V |
Nominal Capacity (1Hr) | 130Ah |
Case Dimensions (L x W x H) | 328mm x 171mm x 234mm |
Weight | RHP | 16.70 Kg (without MPPT) |
Cycling voltage | 12.8~ 14.6V |
Charge voltage | 13.8 ~ 14.6V |
Float Voltage | 13.5 ~ 13.7V |
Maximum Charge Current | 125A |
Recommended Charge Current | ≤100A |
Maximum Discharge Current | ≤200A |
BMS (built in) | Automatic cell balancing, over discharge/charge |
Cell Chemistry | DCS 3.2V 5.0 – 7.2Ah Cylindrical (LifePO4) |
Cycle Performance | 2500 Cycles @ 100% DOD |
LCA (Lithium Cranking Amps) | 1300A |
Ingress Protection | IP54 |
Case | PP (flame retardant) |
Operating temp Range | -30 to +110 degrees C |
Terminals | Top Mount M8 Stainless steel / Copper |
Parallel Connections Only | Yes |
Warranty | 3 years |
Certifications | UN 38.3, UL 1642, IEC 62133 & 62619, CE |

DOWNLOAD APP (DCS LFP)
DCS Bluetooth Technology powered by DCS LFP, this APP is only for DCS LFP batteries which is based on BLE 4.0 technology.
This App provides comprehensive monitoring for DCS LFP batteries, including:
- SOC%
- Battery pack voltage
- Amp meter – charge and discharge current
- Battery Management MOSFET temperature
- Individual Cell Status with balancing indicators.
- Connectivity distance up to 10 meters.